Quarter Panels Replacement Components

Why do drivers need quarter panels replacement?

A quarter panel was one-quarter of a vehicle's body. It was the part of the car that was attached to the frame, doors, and front sheet metal. The name has not changed over time.

As a result, a quarter panel (or rear wing) is the automobile's body panel (exterior surface) that runs between a rear door (or just a door on each side for two-door models) and the trunk (boot). They are pretty important because a good quarter panel can help to protect you and your belongings in the event of an accident. Many drivers ask questions like 'Can a quarter panel be replaced?' Well, the answer is yes, it can be replaced.

There are a few reasons why a driver might need to replace their quarter panel. The most common reason is due to damage from an accident. If the car is hit hard enough on the side, the quarter panel can be crumpled and bent out of shape. This not only looks bad, but it can also affect the car's aerodynamics and make it harder to drive. In some cases, the quarter panel might need to be replaced simply because it has corroded or rusted away.

Thus, if your car has been involved in a rear-end collision, then the chances are that the quarter panel has been damaged. This is because the impact of the collision will cause the metal to bend and dent. In some cases, the quarter panel may even be completely ripped off. If this has happened to you, then you will need to have it replaced as soon as possible.

So, how much does it cost to replace a quarter panel on a car? A quarter panel replacement is not a cheap job, but it is definitely something that needs to be done if your car has been involved in an accident. The good news is that there are many reputable companies out there who can do the job for you and they will usually give you a warranty on their work.

Unfortunately, the cost of repairing a quarter panel is usually around $2,000. Quarter-panel repairs are frequently expensive because of the complexity involved.

Quarter Panels terminology and definitions

Are quarter panels structural?

Despite the fact that a quarter panel is not considered a structural element of the vehicle structure, they do influence the overall design. The size, shape, and thickness of the quarter panel can affect how the vehicle looks and drives. When it comes to repairing or replacing your quarter panels, it's important to consider all these factors.

How important is garnish molding?

The answer may surprise you. Garnish molding is the strip of trim that runs along the top edge of a car's quarter panel, between the door and the rear window. Its purpose is twofold: to protect the paint from nicks and scratches, and to provide a finished look to the car's exterior.

How to maintain panel skin?

Panel skin is the car`s quarter panel. Maintaining it is essential to the car`s appearance and resale value. Wash your quarter panel regularly, as this will remove dirt, debris, and other contaminants that can damage the panel skin. Wax and polish it for a better look and longer lifetime.

What are the different quarter panels types?

For those drivers who decided to replace a quarter panel on the respective car or just decided to buy a new OEM variant, we strongly recommend sorting out all the classes of their components. Here we will tell you about some of the main constituents of quarter panels and hope it will help you with your further choice.

So, the first element is a quarter panel skin. It is the most visible part and the one that can be replaced without any problems. The second type is a quarter inner reinforcement. It is usually made of steel and provides additional rigidity to the whole structure. The third variant is garnish molding. It helps to protect the edges of your car's quarter panels and gives it a more finished look.

The fourth element is a rocker panel. It is located beneath the doors and connects the front and rear quarter panels. Finally, the fifth constituent is a wheel well opening filler panel. It covers the exposed areas around the wheels and helps to improve the aerodynamics of your car.

Also, pay specific attention to the wheel arch and wheel opening patches. They serve to reinforce the wheel wells and wheel arch openings. If something happens with these quarter panels components, they will probably need to be replaced as well.

Now you know what quarter panels are, what they are for, and what types of them exist. We hope that this information will be helpful for you and will help you make the right decision if you ever need to replace your car's quarter panel.

Things to consider when choosing replacement components

As you can see, there are a lot of components for quarter panels and each of them has its particular aspects to regard when a driver decides to buy a replacement option.

Here are some tips that will help you make the best choice:

Choose the material carefully. There are different materials used for quarter panels, such as aluminum, steel, and fiberglass. Each of them has its pros and cons, so make sure to choose the one that suits your needs the most.

Consider the price. Quarter panel replacement is not a cheap job, but it is definitely something that needs to be done if your car has been involved in an accident. The good news is that there are many reputable companies out there who can do the job for you and they will usually give you a warranty on their work. Unfortunately, the cost of repairing a quarter panel is usually quite expensive.

Make sure to select a reputable company. There are many companies that offer quarter panel replacement services, but not all of them are created equal. Do your research and choose a company that has a good reputation and that offers a warranty on their work.

Get it done as soon as possible. If you have been in an accident and your quarter panel has been damaged, it is important to get it replaced as soon as possible. The longer you wait, the more damage can be done to your car.

Installation process and quarter panels

No matter what your reasons for wanting to install new quarter panels are, it's important to know a few things about the process before you get started. Here's what you need to know about installing quarter panels.

First, let`s check out a brief guide on how to replace quarter panels yourself.

Step1. Remove the old quarter panels. This is usually done by removing the bolts that hold them in place. You may need to use a power drill to get the bolts out.

Step2. Clean up the area where the new quarter panel will be installed. This includes removing any rust or debris that may have accumulated over time.

Step3. Install the new quarter panel. This is typically done by lining up the new panel with the existing holes in the vehicle and then bolting it into place.

Step4. Repeat for the other side. Once you've installed the new quarter panel on one side, repeat the process for the other side.

Step5. Enjoy your new look!

You can do it yourself, but is it really worth risking? On one hand, replacing your own quarter panels can save you money on labor costs. On the other hand, if done incorrectly, it could lead to further damage to your vehicle. If you're not confident in your ability to replace quarter panels yourself, it's best to leave it to the professionals.

If you entrusted this job to a specialist and don`t know whether the replacement was really done efficiently or there are some nuances, here are several aspects to pay attention to after you get the car:

- Look at the new panel from different angles and check if it lies flush with the rest of the car's body.
- Inspect the area around the new quarter panel for any gaps or irregularities.
- Make sure that all of the bolts holding the quarter panel in place are tight and secure.
- If you had to remove any trim pieces to install the new quarter panel, make sure they are correctly reinstalled before driving the car.

OEM or aftermarket quarter panels?

As a final point, we want to discuss what is better to buy – OEM or aftermarket parts. Here are the pros and cons of each option:

- Aftermarket parts are usually cheaper than OEM parts.
- OEM parts are made to fit your car specifically, while aftermarket parts may not fit as well.
- Aftermarket parts may not be made from the same high-quality materials as OEM parts.
- OEM parts come with a warranty from the manufacturer, while aftermarket parts typically do not.

In general, we recommend going with OEM quarter panels if you can afford them. They will fit better and last longer than aftermarket alternatives. However, if you're on a budget, aftermarket quarter panels can still get the job done. Just be sure to do your research and buy from a reputable company.

Installing new quarter panels is a big job, but it's one that you can handle if you're confident in your abilities. Just be sure to take your time, follow the instructions carefully, and use quality materials. With a little bit of elbow grease, you can have your car looking like new again in no time!

Conclusion

Many drivers believe that quarter parts panels are one of the most important parts of the car. If they get damaged, it can lead to problems with the look and the safety of the vehicle. That is why it is so important to know how to install quarter panels correctly.

In this article, we discussed the process of installing quarter panels, what to look for after you get your car back, and whether OEM or aftermarket parts are best. We hope this article has been helpful in answering some of your questions.